sábado, 25 de junho de 2011

OTARI MX5050B-III. Este belíssimo Deck de Rolo é vendido atualmente. Ou seja, voltaram a fabricar Decks de Rolo pelo reconhecimento de sua qualidade e excelência de som.



OTARI 5050BX-III

Este Otari está usando carretel de 10 polegadas e fita de 1/4 polegada. Grava em duas pistas, uma "baita" largura para uma excelente dinâmica de freqüências! O site da fábrica é o abaixo descrito. Leia suas características técnicas. Consulte o site: http://www.otari.com/product/recorder/mx5050/index.html

Interessante vídeo sobre Decks Profissionais da Tascam - http://www.youtube.com/watch?v=REv6ojfVYrw&feature=related





RMGI - Recordable Media Group International: Vendas pela Internet: http://www.rmgi.eu/

RMG International has the EMTEC production know-how, formulations and patents. (Adquiriu a EMTEC).
ONDE COMPRAR FITAS PARA DECKS DE ROLO OU CARRETEL: (Continuam a ser fabricadas pela RMGI, venda pela internet: http://www.rmgi.eu/ (Atualizado em 29/06/2011).




QUANTEGY VOLTA A VENDER - Atualizado, 25 de junho de 2011. Site: http://www.quantegy-online.com/index.html


EMBORRACHADORES DE ROLOPRESSORES DE DECKS DE ROLO E CASSETTES DECK

CASA DAS CORREIAS ODISON ELETRÔNICA LTDA. - Rua dos Timbiras, 154 - São Paulo - SP. CEP 01208-010. Tels. (11) 3223-3458, (11) 3223-3458  e 3361-2722. Gilberto.

Correias Frassetto - Correias de borracha - Rua Arthur de Azevedo, 508 - CEP. 05404-001 - São Paulo - SP. Telefones: (11) 3062-3040; (11) 3062-3040; Fax: (11) 3085-8530.
E-mail: frassetto@frassetto.com.br


 
HISTÓRIA (Arquivo)
RIO TAPE COMÉRCIO LTDA.: http://www.riotape.com.br/riotape/ - Telefones (Todos DDD 21) 3386-8043 - 2462-4615 - 9265-7919. RIO TAPE - Ilha do Governador, Rio, RJ. (Não estão vendendo, no momento) (Atualizado em 07 de novembro de 2011).

Postagem de mais de dois anos atrás: (Final de estoque da Quantegy: Está sendo vendido pela REELDEALPA - http://www.reeldealpa.com/ firma comprou o estoque da Quantegy, que fechou. Lembrando que a RMGI comprou os direitos de fabricação, patentes e formulações da EMTEC).

__

OTARI MX5050B-III

The OTARI MX5050B-III has long been the standard in 1/4" two-track analog recorders. It features an optimized three-head design and transformerless balanced inputs and outputs to provide superior frequency response, low distortion and high signal-to-noise performance under the most demanding conditions. Record setup adjustments can be made from the front panel, and a convenient built-in oscillator provides test tones for calibration/maintenance.
comm_dotline_03.gif

Features (Características)

The direct drive capstan motor is servo-controlled, and an integral microprocessor governs tape handling, including dynamic braking, motion sensing and transport logic. A built-in mini-autolocator provides three one-touch cue-point memories, search zero, and a repeat function. The tape timer display shows tape time in Hrs/Min/Sec., as well as tape speed in inches per second and percentage of tape speed. Capstan speed can be varied by ±20% in 0.01% steps using the built-in "pitch" control. Timecode editing using a synchronizer is accomplished via the 37-pin Otari standard parallel interface.

The extremely rugged mechanical construction includes a 1/4" deckplate with cast aluminum side panels and steel support members. All circuit boards are designed to swing out or unplug for quick service access.

* Positive-action transport controls
* Balanced transformerless XLR I/Os
* DC capstan, Quartz PLL servo-controlled
* Built-in mini-autolocator
* Built-in test oscillator and external oscillator input
* Variable pitch control (±20%)
* Front panel record setup adjustments
* 1/4" deck plate with cast aluminumside panels and steel support members.